Log in
Product category:
Tools

Crimping

Filter

Products 184

Han CRIMP TOOL WITH LOCATOR
Service crimping tool

Han CRIMP TOOL WITH LOCATOR

Art.No.: 09 99 000 0021
Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224), Han E®: 0.5 ... 2.5 mm², Han-Yellock®: 0.5 ... 2.5 mm² Conductor cross-section: 0.14 ... 2.5 mm²
Han Hand Crimp Tool
Hand crimping tool

Han Hand Crimp Tool

Art.No.: 09 99 000 0110
Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224), Han E®: 0.5 ... 4 mm², Han-Yellock®: 0.5 ... 4 mm², Han® C: 1.5 ... 4 mm² Conductor cross-section: 0.14 ... 4 mm²
Double-Indent Crimping Tool
Crimping tool

Double-Indent Crimping Tool

Art.No.: 09 99 000 0888
Han D®: 0.14 ... 2.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6107/6207 and 09 15 000 6127/6227), Han E®: 0.14 ... 4 mm², Han-Yellock®: 0.14 ... 4 mm², Han® C: 1.5 ... 4 mm²
Crimping Tool Han C 4/6/10 mm2
Hand crimping tool

Crimping Tool Han C 4/6/10 mm2

Art.No.: 09 99 000 0377
Han® C: 4 ... 10 mm² Conductor cross-section: 4 ... 10 mm²
DSUB HAND CRIMP TOOL INN.COAX/SIGNAL C.
Hand crimping tool

DSUB HAND CRIMP TOOL INN.COAX/SIGNAL C.

Art.No.: 09 99 000 0501
for turned male and female contact, 4 indent crimp in acc. to MIL 22 520/2-01 Conductor cross-section: 0.09 ... 0.82 mm²
Locator D-Sub turned standard contacts
Locator

Locator D-Sub turned standard contacts

Art.No.: 09 99 000 0531
for single D-Sub standard contacts
basic hand crimp tool BC/FC/har-bus64
Hand crimping tool

basic hand crimp tool BC/FC/har-bus64

Art.No.: 09 99 000 0620
for individual DIN 41612 contacts, BC / FC / har-bus® 64
crimp set FC 3
Crimping insert

crimp set FC 3

Art.No.: 09 99 000 0623
for individual contacts, FC 3 Conductor cross-section: 0.5 ... 1.5 mm² for FC 3 contacts
SUB-D CRIMP TOOL SINGLE CONTACT
Hand crimping tool

SUB-D CRIMP TOOL SINGLE CONTACT

Art.No.: 09 99 000 0175
for single stamped D-Sub contact Conductor cross-section: 0.09 ... 0.56 mm²
Crimp set BC/FC1/har-bus 64
Crimping insert

Crimp set BC/FC1/har-bus 64

Art.No.: 09 99 000 0621
for individual contacts, BC / FC 1 / har-bus® 64 Conductor cross-section: 0.09 ... 0.5 mm² for BC contacts 0.09 ... 0.25 mm² for FC 1 contacts
crimp set FC 2
Crimping insert

crimp set FC 2

Art.No.: 09 99 000 0622
for individual contacts, FC 2 Conductor cross-section: 0.14 ... 0.56 mm² for FC 2 contacts
Go / no-go gauge for 09990000888
Check gauge

Go / no-go gauge for 09990000888

Art.No.: 09 99 000 0889
for crimping tool 09 99 000 0888, for optional testing
DIN-Tool Ersatzhülse M
Replacement-tip

DIN-Tool Ersatzhülse M

Art.No.: 09 99 000 0243
DIN 41612, for removal tool 09 99 000 0174
DIN-Tool Positionierer FC
Locator

DIN-Tool Positionierer FC

Art.No.: 09 99 000 0631
FC, for part number 09 99 000 0620
D SUB HD SERVICE CRIMP TOOL
Hand crimping tool

D SUB HD SERVICE CRIMP TOOL

Art.No.: 09 99 000 0596
Crimptool Opening
Hand crimping tool

Crimptool Opening

Art.No.: 09 99 000 0647
for crimp barrel and crimp flange
Crimp die 16mm² for 60 kN tool
Crimp die

Crimp die 16mm² for 60 kN tool

Art.No.: 09 99 000 0853
for 60 kN tool Conductor cross-section: 16 mm²
Crimp die 10mm² for 60 kN tool
Crimp die

Crimp die 10mm² for 60 kN tool

Art.No.: 09 99 000 0852
for 60 kN tool Conductor cross-section: 10 mm²
Locator Set Han D/E/C, for Crimping tool
Locator

Locator Set Han D/E/C, for Crimping tool

Art.No.: 09 99 000 0376
Spare part, Han D®, Han E®, Han® C
Crimp die 25mm² for 60 kN tool
Crimp die

Crimp die 25mm² for 60 kN tool

Art.No.: 09 99 000 0854
for 60 kN tool Conductor cross-section: 25 mm²
20 (of 184)