Product category:
Tools

Hand crimping tools

Filter

Products 50

Han CRIMP TOOL WITH LOCATOR
Service crimping tool

Han CRIMP TOOL WITH LOCATOR

Art.No.: 09 99 000 0021
Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224), Han E®: 0.5 ... 2.5 mm², Han-Yellock®: 0.5 ... 2.5 mm² Conductor cross-section: 0.14 ... 2.5 mm²
Han Hand Crimp Tool
Hand crimping tool

Han Hand Crimp Tool

Art.No.: 09 99 000 0110
Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224), Han E®: 0.5 ... 4 mm², Han-Yellock®: 0.5 ... 4 mm², Han® C: 1.5 ... 4 mm² Conductor cross-section: 0.14 ... 4 mm²
Double-Indent Crimping Tool
Crimping tool

Double-Indent Crimping Tool

Art.No.: 09 99 000 0888
Han D®: 0.14 ... 2.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6107/6207 and 09 15 000 6127/6227), Han E®: 0.14 ... 4 mm², Han-Yellock®: 0.14 ... 4 mm², Han® C: 1.5 ... 4 mm²
Crimping Tool Han C 4/6/10 mm2
Hand crimping tool

Crimping Tool Han C 4/6/10 mm2

Art.No.: 09 99 000 0377
Han® C: 4 ... 10 mm² Conductor cross-section: 4 ... 10 mm²
DSUB HAND CRIMP TOOL INN.COAX/SIGNAL C.
Hand crimping tool

DSUB HAND CRIMP TOOL INN.COAX/SIGNAL C.

Art.No.: 09 99 000 0501
for turned male and female contact, 4 indent crimp in acc. to MIL 22 520/2-01 Conductor cross-section: 0.09 ... 0.82 mm²
basic hand crimp tool BC/FC/har-bus64
Hand crimping tool

basic hand crimp tool BC/FC/har-bus64

Art.No.: 09 99 000 0620
for individual DIN 41612 contacts, BC / FC / har-bus® 64
SUB-D CRIMP TOOL SINGLE CONTACT
Hand crimping tool

SUB-D CRIMP TOOL SINGLE CONTACT

Art.No.: 09 99 000 0175
for single stamped D-Sub contact Conductor cross-section: 0.09 ... 0.56 mm²
D SUB HD SERVICE CRIMP TOOL
Hand crimping tool

D SUB HD SERVICE CRIMP TOOL

Art.No.: 09 99 000 0596
Crimptool Opening
Hand crimping tool

Crimptool Opening

Art.No.: 09 99 000 0647
for crimp barrel and crimp flange
DSUB HAND CRIMP TOOL POWER CONTACT
Hand crimping tool

DSUB HAND CRIMP TOOL POWER CONTACT

Art.No.: 09 99 000 0509
for power contacts Conductor cross-section: 0.5 ... 6 mm²
DSUB HAND TOOLS
Hand crimping tool

DSUB HAND TOOLS

Art.No.: 09 99 000 0169
for 500 bandoliered standard contacts Conductor cross-section: 0.09 ... 0.56 mm²
CRIMPING TOOL
Hand crimping tool

CRIMPING TOOL

Art.No.: 09 99 000 0120
for 250 bandoliered contacts, FC 3 Conductor cross-section: 0.5 ... 1.5 mm²
Crimping tool for 1mm POF
Crimping tool

Crimping tool for 1mm POF

Art.No.: 20 99 000 1035
for following 1 mm POF contacts, Han D®, Han E®, DIN 41626, Ferrule, F-SMA, -ST
DIN-Tool Crimptool Coax M
Hand crimping tool

DIN-Tool Crimptool Coax M

Art.No.: 09 99 000 0194
Crimp die included, for coaxial contact, acc. to DIN 41626
GDS A-B/C CRIMPING TOOL ON REEL
Hand crimping tool

GDS A-B/C CRIMPING TOOL ON REEL

Art.No.: 09 99 000 0248
for 500 bandoliered contacts, BC / har-bus® 64 Conductor cross-section: 0.09 ... 0.5 mm²
Ferrule Crimp tool 10mm2
Hand crimping tool

Ferrule Crimp tool 10mm2

Art.No.: 09 99 000 0374
for wire end ferrules Conductor cross-section: 10 mm²
DSUB HAND CRIMP TOOL OUTER COAX CONT.
Hand crimping tool

DSUB HAND CRIMP TOOL OUTER COAX CONT.

Art.No.: 09 99 000 0503
for coaxial contact, acc. to DIN 41626, for outer ferrule
D-Sub DIE OUTER COAX CONTACT
Crimp die

D-Sub DIE OUTER COAX CONTACT

Art.No.: 09 99 000 0508
for D-Sub
DIN-Tool Crimpzange FC2
Hand crimping tool

DIN-Tool Crimpzange FC2

Art.No.: 09 99 000 0119
for 250 bandoliered contacts, FC 2 Conductor cross-section: 0.14 ... 0.56 mm²
Crimping tool Han-Fast Lock 4-10mm²
Hand crimping tool

Crimping tool Han-Fast Lock 4-10mm²

Art.No.: 09 99 000 0831
for Han-Fast® Lock single contact, incl. locator Conductor cross-section: 4 ... 10 mm²
20 (of 50)