Ha-VIS eCon 3011GBT-AT1-SPE
Image is for illustration purposes only. Please refer to product description.
Industrial Ethernet Switches
Ha-VIS eCon 3011GBT-AT1-SPE
Article No.: 24 05 401 1400
Properties Overview
Product Details
| Type of Ethernet | Full Gigabit Ethernet |
|---|---|
| Specification | Media converter |
| Element | Industrial Ethernet Switches |
| Series | Ha-VIS eCon 3000 |
| Identification | Single Pair Ethernet (SPE) |
| Fixing | 35 mm DIN rail acc. to EN 60715 |
|---|---|
| Switching technology | Store and Forward |
| Frame size | 10.24 kB |
| MAC table size | 1k Entries |
| Packet buffer size | 1 Megabit |
| Non blocking | Yes |
| Quality of service | Yes |
| Signal contact | No |
| Pack contents | Pluggable screw contact for power supply |
| Assembly instructions | |
| Total number of ports | 2 |
| MAC–address filter | LLDP and PROFINET PTCP Delay (01-80-C0-00-00-0E) blocked |
| PoE functionality | No |
| Jumbo frame support | Yes |
| Field of application | Indoor usage |
| Storage temperature | -40 ... +85 °C |
|---|---|
| Relative humidity | 0 ... 95 % Non-condensing (operation) |
| 0 ... 95 % Non-condensing (storage/transport) | |
| Air pressure | ≥795 hPa ≈ 2000 m |
| Degree of protection acc. to IEC 60529 | IP30 mated condition |
| Operating temperature | -40 ... +70 °C |
| Pollution degree | 2 |
| Overvoltage category | II (400 ≤ CTI < 600) |
| PROFINET | Yes |
|---|---|
| Specifications | EN 55032 emission standard |
| EN 55035 EMC Interference immunity | |
| EN 61000-4-2 Electrostatic discharge (ESD) | |
| EN 61000-4-3 Electromagnetic field | |
| EN 61000-4-4 Rapid transients (burst) | |
| EN 61000-4-5 Surge voltages | |
| EN 61000-4-6 conducted disturbances | |
| EN 61000-6-4 emission standard | |
| IEC 60068-2-6 Vibration (sinusoidal) | |
| FCC | Yes |
| Approvals | CE |
| on request |
| Material (hood/housing) | Aluminium (anodised) |
|---|---|
| Stainless steel | |
| Length | 34 mm |
| Width | 33 mm |
| Height | 130 mm |
| RoHS | compliant with exemption |
| RoHS exemptions | 6(c): Copper alloy containing up to 4 % lead by weight |
| ELV status | compliant with exemption |
| China RoHS | 50 |
| REACH Annex XVII substances | Not contained |
| REACH ANNEX XIV substances | Not contained |
| REACH SVHC substances | Yes |
| REACH SVHC substances | Lead |
| California Proposition 65 substances | Yes |
| California Proposition 65 substances | Lead |
| Nominal voltage | 24 V DC |
|---|---|
| 48 V DC | |
| Permissible voltage | 16.8 ... 60 V DC |
| Surge protection | Yes |
| Operating current | 80 mA @ 24 V DC |
| 45 mA @ 48 V DC | |
| Starting current | <1.3 A @ 24 V DC |
| <2.2 A @ 48 V DC | |
| Overcurrent protection | 2 A At input |
| Termination method | Pluggable screw contact |
| Number of contacts | 3 |
| Power consumption | <2.2 W @ 24 V DC |
| Conductor cross-section | 0.08 ... 2.5 mm² |
| Pinout | + / - / FE |
| Reverse polarity protection | Yes |
| Supply circuit | SELV (Circuit Breaker 10 A) |
| Conductor cross-section | AWG 28 ... AWG 12 |
| eCl@ss | 19170130 Network switch (general application) |
|---|---|
| Net weight | 238 g |
| Packaging size | 1 |
| Country of origin | Germany |
| European customs tariff number | 85176200 |
| GTIN | 5713140195219 |
| ETIM | EC000734 |
| 10/100/1000 Mbit/s (RJ45-Ports) | 1 |
|---|---|
| 1000 Mbit/s (RJ45-Ports) | 1 |
| Transmission standard | 1000BASE-T |
| Auto-negotiation | Yes |
| Auto-polarity | Yes |
| Auto-MDI(X) | Yes |
| Data rate | 1,000 Mbit/s |
| Transmission length | 100 m |
| Transmission physics | Twisted Pair Cat. 5 |
| 1000 Mbit/s (SPE-Ports) | 1 |
|---|---|
| Transmission standard | 1000BASE-T1 |
| Transmission physics | Twisted Pair 2 wires |
| Data rate | 1,000 Mbit/s |
| Transmission length | 40 m |
| Configuration Master-Slave | via DIP-Switch |
Previous
Next